.

Carrier Strip Splicer Models
.
Technical Data S-40/0 S-70/0 W-125
No. of Carriers 1-2-3 or 4 1-2-3 or 4 1-2-3 or 4
Max. Width of Carrier 10 mm 10 mm 10* mm
Max. Width of Strip 40 mm 70 mm 125 mm
Max. Thickness of Carrier 1 mm 1 mm 0.5 mm
* May be increased if required
The original Kloften & Kloften Carrier Strip Splicer (Model "S") uses silver solder to butsplice the carrier with no or very little increase in thickness. The "W" model uses a "seam welding" process.
.
Th. Lovstadsvei 50, 0286 Oslo Norway - Phone: +47 22 43 72 66 - Fax: +47 22 55 92 72 - E-mail: kloften@c2i.net
Bank: Nordea, Oslo - Acc. No. 6038.05.41311 - Enterprise Reg. No. 826287012